Wiring Help?

Jarrit111

New member
Joined
Nov 22, 2019
Messages
1
Reaction score
0
Points
1
Location
Maryland
So I have a 86 trans am that has the 4b Carburetor.

I want away for a year and I had a few wires chewed up.

I fixed most of them but this one that I can't figure out how is best or how to take the plug apart.




Sent from my iPhone using Tapatalk
 
Last edited by a moderator:

Mike1iron

Member
Joined
Nov 26, 2019
Messages
3
Reaction score
7
Points
3
Location
Muskoka Ontario
The connector needs to be pulled apart. Each terminal can be released from the plastic housing by sliding a very small flat screwdriver behind the terminal and pushing the locking tab inwards. This will release the wire terminal. You can buy new wire terminals anywhere and just put your new wires into these new terminals and slide them back into the plastic housing.

There are videos on youtube on how to replace automotive wire terminals if you're stuck.

Do the repair the right way and you will not have any further electrical problems. Don't cut corners or it will come back to haunt you somewhere on a dark country road.
 
Last edited by a moderator: